Having run the otherwise fabulous Squirt chain wax for around 2,400 miles, the tell-tale metal on metal symphony chimed time so after giving the cassette a thorough comb-through to remove any residual sludge, I applied some of this Muc Off C3 ceramic lube. Ceramic blends have become extremely fashionable thanks to baron nitride and similar ingredients that are associated with longevity/corrosion resistance. Muc-off are very coy about the true composition, advising it’s a trade secret (think Coca-Cola) but it does seem slightly different to other leading brands’ and only requires a single, rather than two-stage application in the first instance.
That said, the instructions still recommend a four hour curing period so for most of us, this means applying the night before-a technique that comes as second nature coming from dry formulas but then wet lubes are ready to go straight from the spout. That aside, for it to impress, I need to return at least 220 winter miles from each application-a consistent average using another leading brew and for now I’m going to leave you guessing as to its identity. It seems equally fashionable-or lazy marketing on the manufacturers’ part to recommend their use on control cables but in my experience this works for a very short period, whereupon the brew solidifies, demanding solvent/water displacer bypass surgery.
There’s another school of thought suggesting that all bicycle lubes are over-priced-at least relative to those developed for motorcycle chains. Liked the idea of the Scott-oiler, especially in a cyclo cross/mtb context, although never got round to trying one but experimented with the O-ring chain lubes- Rock oil in particular. While the anti-fling properties were arguably way in excess of those required for a bicycle transmission turning at 100rpm, the consistency a little gloopy and prone to decorating the chainstays, a little went a very long way on fixed and cross country mountain bikes subjected to the ravages of winter. Other experimentation (of the legal and morally righteous kind) involved semi/synthetic two-stroke oils- Husqvarna chain saw type proving surprisingly useful (albeit relatively expensive) without attracting too much dirt or washing away in the first big puddle.
Sticking with old school for a minute, this post war tandem frameset (c.1952) arrived at the spray-shop in need of some serious TLC. A double diamond design, its once proud gold livery and decals have been somewhat consumed under a blizzard of corrosion. It’s worth remembering that in the inter/early post war years, the tandem was very much a utilitarian vehicle and everyday examples were made from heavier, plan gauge tubing which was not only cheaper but better equipped to shrug off dents and similar accidental damage. This goes a long way to explaining why this example has survived half a century or so. I’ve often toyed with a sleek utility build employing an eight-speed (Sachs Pentasport or Shimano Alfine) hub transmission hung on a bespoke, fillet brazed Columbus tubeset with every conceivable braze on- dynamo, disc mounts, bottles, cable guides etc, etc finished in battleship/dove grey (devoid of decals, save perhaps for my name). This was initially conceived twelve years or so back when drop bars were also unfashionable-at least to the light fingered but presented all manner of problems when it came to mounting the shift mechanism. Since frame and fork alone were nudging £700, experimental bodges were out of the question.