Calculated Gambles

 

 I’d been pondering whether the Shimano Ultegra dynohub’s grease had turned to watery gravy and needed to investigate. I’d always understood Shimano, unlike Shutter Precision, were partially user serviceable. The right side could be stripped and overhauled using a 15mm cone spanner and 17mm for the locknut. Trepidation cast aside, I rounded up spanners, greases, clean rags and solvent. The locknut was quite stubborn, which in some respects is a good sign, but submitted without recourse to penetrant spray.

 Locknut and cone removed, the grease had assumed an oily, but still functional state. The loose balls and bearing races were also free of pitting and similar wear. I toyed with the idea of repacking with Juice Lubes Slick Juice but reached for their Bearing Juice The Juice Lubes Bearing Juice Long Term | cycling-not-racing on the grounds of outright staying prowess. Even allowing for the recent heatwave, viscosity meant it was a little messier to apply but no issues once I’d transferred the excess to the cone.

This would also help seal the elements out. Getting the bearing tension bang on took four attempts. Back in the forks, neurotic checking revealed zero play. Hub strips tend to be annual, or thereabouts, so I can get away with some cheap but cheerful cone spanners. Unlike some cheapies, Lifeline seem accurately machined and sturdy enough for periodic use.

I’ve since invested in this 15mm Park, replacing the Tacx someone borrowed and felt entitled to keep.  I took the Slick Juice route with the trailer’s hub, which, as expected has reduced friction. Will be interesting to see how well it stands up to the elements, especially since it's right in the firing line of puddles and other dodgy water.  I’ve periodically had the idea of upgrading the trailer’s wheel but talked myself out of it. A New Old Stock Deore unit was waved under my nose for less than £8, so I indulged. I’ll seek out a suitable rim, but only at the right price, since all this is want, not need.  

Overhaul complete, I treated Denise to a deep clean. Though not obviously dirty, given the prolonged, dry spell, rear wheel, rack, rear triangle and fork crowns were coated in a stubborn dusty layer. Buckets, Muc-Off Chain Wax Cleaner Muc-Off Chain Wax Cleaner 500ml | cycling-not-racing, Juice Lubes Bike Cleaner, Muc-Off MO94 Muc-Off MO94 Multi Use Spray | cycling-not-racing and assorted brushes rounded up, twenty minutes later, Denise was washed, dried and lightly re-lubed. Knowing when to down tools and pack up-quitting while ahead is another important skill. Sometimes, if it aint broke, don’t fix it.  

 The chain was still below .25 on the chain wear indicator, and I was going to run the fleet on wax lubes for as long as conditions permitted. Back to testing Ursula’s M Part Ridge Pannier rack and some fixed gear frolicking aboard Muffin. Having discovered the Ride’s top section broader than the Summit-confirmed when strapping my long serving Carradice Super C atop.

This was filthy, so I decided to take it for a thirty-degree Tour De Zanussi, adding some wash-in proofing. Now, this isn’t strictly the way to treat cotton duck, so a gamble at my own risk. However, it seems to have emerged in good health. I decided to take my 25-year-old SQR Tour the same route since, while very solid, it was looking very jaded. The sun and other elements had bleached the fabric in places and there’s no getting that back, but it was at least, clean and re-proofed.   

This also presented the ideal opportunity to give the washing machine’s soap try a thorough cleaning to remove accumulated soap scum and similar.

 Ideally, we should follow manufacturer instructions regarding care to the letter and have no recourse, should we deviate. Those of you looking to reproof cotton duck luggage should give them a good wash and then apply Carradice’s own reproofing wax.  I even found a box of high-quality patches, which was another pleasant surprise.

One thing led to another. I decided it was high time I had a sort through of the work bench. I decanted a myriad of small fasteners, mounts and similar into dedicated zip lock baggies and found and appropriate storage box. I’d been slightly disappointed by the OEM Coospo CS600 Coospo CS600 GPS | cycling-not-racing Garmin pattern mount adorning Ursula’s bars but hadn’t found a suitable contender.

Firmly in the zone, I discovered a couple of Magicshine mounts- the type employed on the marque’s Allty and Ray series. These employ a Garmin pattern head mount and a series of straps, so a universal fit. One, already attached was in Goldilocks territory. Sixty seconds later, a neater, sturdier host. A small but very satisfying upgrade.

Next, I decided to road test my hypothesis that wrapping some scrap inner tube around the quick-release trailer hitches would act as a damper. One producing a tighter union, silencing a slight rattle.  Formative impressions are favourable, although trailer release is less convenient than ideal. Maybe thinner tube, or even electrical tape is the solution... 

 

 

 

       

The Summer of Wax

 

I’ve been defaulting to wax lubes through spring and testing aside; this is likely to continue through into early autumn. Murphey's law has seen conditions take another dramatic change. It was now wetter than the proverbial Haddock's underpants- great for my crops but not conditions where waxes traditionally excel. I'm sticking with them for now, since I have several blends and they generally speaking, attract minimal dirt, thus extending the useful life of chains, cassettes, derailleurs and rings.

 After 130 miles, upon returning from the morning’s meander, Denise’s KMC chain was beginning to look thirsty. I went to retrieve the KMC GO but then wondered if two loosely similar waxes would prove chemically compatible. This would also allow me to use up the remaining Weldtite Wax Weldtite Wax Lube | cycling-not-racing.

 Just before drizzling into every link, I noticed a large sludgy kernel clinging to the Tiagra mech's jockey wheel, so scooped that away using this BBB chain gauge first- another strangely satisfying job.  

Gunk purged, I shook the Weldtite Wax bottle again, popped the spout and dropped into every link, spun the cranks to ensure even penetration and left curing. Twenty-five wet miles, I wasn’t surprised to discover the chain had turned a scuzzy, dark grey.

I hoped the wax had just arrested contaminant and wasn’t becoming a grinding paste. Though waxes are renown for cleanliness, if traces of an oil-based lubricant are left on the chain, the two formulas will trap grit, leading to accelerated drivetrain wear. Mercifully, the KMC and Weldtite seem mutually compatible, grime scabbing away during the next twenty-mile outing, leaving a protective film behind.  

I'd also reached that tipping point where an idea was becoming the ONLY idea-namely replacing the 2x10 Deore for a 3x10- I was looking to upgrade too, to an XT. Mercifully, I was able to talk myself out of this burgeoning obsession by reminding myself that doing so would require a longer rear mech-additional and moreover, unnecessary expense. The most cost-effective upgrade if I was going for a new mech would be a 38, or 40 tooth big ring and a 12-34 cassette. Not a triple. 

The latest generation of gravel “mullet” drivetrains on gravel builds is, for me, very reminiscent of those found on mid-late 80’s mountain bikes. Not the freewheels, rather the derailleur cage length. Cages were hanging perilously low to the ground. In fact, in some circles, it seemed the lower you’re cage, er, hung, the better. This also prompted a swing to using short cage road mechs. However, this proved rather short-lived, once many became the casualties of rocks and off road’s general rough n’ tumble.

Continuing this waxy theme, Extra UK has kindly sent me this All-Mountain Style Miami Glide Chain Wax. Developed and manufactured in Barcelona, it claims to be an all-season’s lube. One promising smooth, clean, durable performance in dry to damp conditions. I’m looking forward to putting it to the test. In common with most waxes, it demands a surgically clean drivetrain first time round and emerges from the spout as a faint blue. A visual clue as to how much you’ve applied. Curing times are in terms of hours, so I’d leave overnight, where possible.

Extra also sent me some nice goodies from Topeak. Racks have fallen a little out of vogue in general terms, thanks in part to the popularity of gravel and bikepacking luggage. I’m fond of both, neither are better than the other, just more appropriate in certain contexts. Continuing this theme, I’ve always been fond of Topeak’s Quick Track System-the refinement and security specifically. I first encountered it back in 2009, but at the time commented the only drawback was the system specific design.

However, Topeak has since extended the appeal by offering a Quick Track plate as a retrofittable option. I was keen to see how that would perform with the M Part Summit Rear Rack M Part Summit Rear Rack | cycling-not-racing and Topeak’s MTX Trunk Dry Bag Topeak MTX Trunk Dry Bag | cycling-not-racing .

Finally, we’ve Topeak’s Drybag Pannier. This one’s the smaller, 16 litre version, but there’s a 24-litre sibling, should you prefer.  Sonically welded TPU construction and roll top closure bode well for keeping stuff bone dry and a 10-kilo payload is similarly reassuring. Mounting hardware is another thing that can make, or indeed, break otherwise decent luggage.

Rixen Kaul has long been the benchmark when it comes to reliable, user-friendly mounting hardware. Topeak’s in-house handle lock system is a spring-loaded system that works to a similar principle -pull the handle upward to release, press down onto the rack and it will click into place. The lower foot is also tool free and really easy to adjust, say when switching between bikes.  A single compartment is cavernous but potentially blessing and curse- depending on what and how you are packing.