Friday, 23 September 2011

On a Budget

Now there’s a phrase that pretty much embodies the times we live in and I’m going to stick with its positive, as opposed to negative connotations. A childhood friend has recently fancied dipping his toe into the road bike pond and invested in this cheap but very cheerful shop branded model. Plain gauge 7005 series TIG welded aluminium frames with hi-tensile steel forks aren’t going to set anyone’s Lycra ablaze and don’t merit wholesale upgrading. However, dressed in a pleasant starter groupset give a taste of spirited riding, plenty of smiles per mile and can be relegated to a serviceable winter/trainer when the time comes thanks to sensible clearances (700x25 inc fenders).

The only obvious low-point are the resin Shimano 600 pattern copies with ultra agricultural bearings but he plans to substitute these for double sided SPDs at the earliest opportunity. Bonding with one’s bike is a crucial part of riding and subsequent days have seen the introduction of bottle cages, mini pumps, wedge pack and a seat collar cosy crafted from off cut of redundant MTB inner tube. This will prevent dirt and ingress thrown up by the rear wheel entering the seat-tube and causing corrosive havoc, although fenders are likely to follow as fall advances. It’s nice to see a newbies develop as the bug bites that little bit deeper with every turn of the cranks so we’ll pop back and forth to sneak a peek at their blossoming relationship.
Leaving dry cells dormant inside nearly destroyed this brilliant budget One23 blinky. Mercifully genocide was narrowly avoided with some contact surgery, replacement cells and cursory lick of Vaseline. The Good folk at Moore Large (http://www.todayscyclist.co.uk/) have sent me One23’s three-mode Intense bright 1 front lamp. Closer inspection suggests it’s markedly similar to RSP Steradian- by no means a bad thing, neither is the collimator lens which is increasingly approaching industry standard these days. First impressions suggest peripheral illumination is among the best of this genre but some serious late night testing will give a better flavour of it’s capabilities. Curiously we’ve been promised a bitter winter here in the UK and “snow” (as distinct from that familiar to the populations of Scandinavia and North America) could be knocking at our doors come October. Heeding this warning and while opportunity presented itself, I’ve applied a liberal helping of Waxoyl to the KA chassis and inside ferrous framesets. BRRRRR!
My classic road bike has just turned twenty-one and I’m looking to complete the makeover with some good quality vinyl lettering and a set of Crud Racer II full-length fenders. Think it’s time those Magnesium bodied Genetic keo patterns made a return too…
Talking of retro, this Rossin frameset dating from the late 1980s arrived at Maldon Shot blasting &Powder coating ready for a makeover. Built from Columbus Gara, a thicker walled, lower end Cro-moly marketed at the touring and training fraternities and dripping in period chrome detailing (Ironic since the Italian tube maker forbid electroplating) it presents a wealth of potential headaches since the shiny stuff doesn’t magically end and paint commence


Enamellers typically employ acid etch primers to forge good union but the slippery electroplating eventually wins. Slight fading and inevitable chipping aside, this had been well loved and everything was basically sound. To avoid pitting, Graham mummified the chainstays and lower fork legs in electrical tape before passing the frameset inside the smaller blast cabinet. This uses less aggressive aluminium oxides to remove the enamel while providing a decent key for the chrome/paint overlap. Fifteen minutes later, it emerged clean and ready to receive zinc chromate and subsequent colour coats. Timeless gloss black, although hardly flamboyant is classy, affordable and extremely practical nonetheless. Here’s to another twenty-three years faithful service…

























































































Saturday, 10 September 2011

Adapt & Survive


I’m not one for meaningless marketing speak but sometimes less is genuinely more-especially when it comes to computers. Models that pretty much make the tea are a joy to play with and really effective training tools when used properly but there’s a lot to be said for simplicity. Urban has become the buzzword for minimalist chic and RSP CX3.0 seems to embody this perfectly. Including wireless, sleep and two bike functions (allowing it to be swapped from best bike to winter workhorse) amongst the nine is perhaps gilding the lily but the super clear display and “telling you straight” accuracy complete with motivational pacer arrows means its great for everyday riding and training duties.


Playing devil’s advocate, many brands offer seventeen function wireless types for the same money but having survived repeated September downpour and an unintentional trip through the washing machine; suggesting build quality is a notch higher than most. Simple rubberised rings hold the mounting plate securely to even these WTB and are so vastly superior to low-rent cable-tie affairs, it’s difficult to grasp why this method of attachment hasn’t become universally popular. Mode and set buttons are well conceived too, easily operated in gloved hands without being overly sensitive to accidental knocks. Night owls such as myself will mourn the omission of a backlight and on a wider note; I’m disappointed by the distinct lack of models without a cadence function…wired or otherwise. Debatable around town and on short haul time trails, maintaining a steady cadence is remains pivotal to efficient cycling. Seem to recall managing 188rpm turning an eighty-one inched fixed on a mile long descent several years back.


Maybe I’m showing my age but once upon a time there was a game for the Commodore 64 called “BC’s quest for tires”. The central character was a uni-cycling caveman who had to ride his way through various canyons collecting tyres and avoiding hazards en route. I’m thinking of producing a sequel for the modern age, imaginatively entitled “ Michael’s quest for (big) tyres. Why? Because I’m relentlessly searching for the ultimate go-anywhere, minimum compromise semi slick capable of bombing along asphalt and through forest alike. 1.75 inches wide, 85psi maximum pressures for asphalt duties with a stout puncture preventative belt being my design brief.



To date, Vittoria Randonneur trail are the closest I’ve come to this particular Nirvana. Several thousand miles later, ours still look as fresh as the proverbial daisy, which is all the more impressive at £20 a pair. Rolling resistance is noticeable alongside a slick on smoothly paved roads but the tread doesn’t turn skittish through bridle path and forest trails at moderate speeds. Really sharp flints can cause mischief, although three flats hardly constitute a blot on their copybook. More than can be said for a small-scale publisher doing everything they possibly can to avoid paying me…Then we have the problem of undercutters, those so desperate to enter the creative professions, they will literally work for free (or nigh on) without a thought as to the consequences for these extremely skilled vocations or their sustainability. This certainly isn’t limited to photography or to a lesser extent, journalism. Some fifteen years ago, Universities were able to draw upon a wealth of students who “Loved to teach” sans recognised professional qualification or tangible experience. This reserve army of labour was happy to accept short-term contracts for £10,000 less per annum, pro rata with the obvious decline in standards.




During last weeks’ production line laundering of technical garments, I resurrected these Scott sport-touring shoes. Classic road looks met with old school sneaker pattern sole and SPD drillings for an unusually practical hybrid on and off the bike. Acres of mesh aren’t ideal for the darker and undoubtedly wetter months but from memory they’ll entertain overshoes so I’ll let serendipity and pedal choice guide me. This might only be a week or so away given the relatively rapid wear rate of these otherwise amiable Keo copy cleats. Speaking of weather, the fall is a busy time for winter hacks, prepped and preened with new bar wrap, cables and other precautionary upgrades. Having completely exhausted my supply of clean lube, select and coordinated rummaging in the garage unearthed a 75%full bottle of nytralube slick caramel- a thin lightweight PTFE derived racing blend. Other options included White Lightning’s epic ride and finish line’s one-stop degreaser and chain prep aerosol but the nytralube will remain my weapon of choice until I get the opportunity to play with the amusingly monikered but widely revered Squirt brand.


Peugeot framesets managed to market themselves on a successful pro pedigree during the 1980s but the production bikes were never particularly special. Some sported nice Reynolds and Columbus tubesets (I always had a secret yearning for the Perthus Pro) but were plagued by poor quality control-fork steerer failures and badly scored seatposts weren’t uncommon during this era. At the other end of the market is this old HLE/Carbolite 103 model. Basically a high tensile steel tolerant of the marques distinctive welding technique, it’s the stuff of winter hacks and a popular choice for first fixer conversions too. Arriving in a very sorry state, a gloss black powder coat not only gives this one a new lease of life but an intriguing air. Right then, I’ll totter off, figure out how to lash a Mont Blanc carrier to my much loved, mile munching Ka and brew some more corrosion inhibitor from the garage.































































Saturday, 27 August 2011

Tales of The Unexpected


As promised I have swapped to the magnesium bodied keo type Genetic courtesy of pattern cleats with a whopping nine degrees of knee-friendly float. Not the most obvious companions for a tubby tourer perhaps but they're something different for the summer months. On our first late evening saunter I stood mesmerised by this majestic sunset when the screech of brakes and splintering of wood tore through our serenity. A group of kids had over cooked the bend in their ageing Peugeot with the obvious consequences.Given the occupants' hasty exit and camouflaging of said vehicle(lack of insurance or similar documents being the obvious motivations) calling for assistance was pointless and frankly, I was just glad to be observing from a safe seventy yards. Darkness is now arriving with little warning, so I've been taking this opportunity to put some LED systems through their paces. Arguably a steady evolution but USB rechargeable models pretty much dominate the market, boasting commendable outputs and run times. Ideally suited to desk bound commuters and freelancers like me, dry cell models boasting thirty plus hour run times from single Cr2032 or AA batteries retain the trump card when touring and/or on long haul audax duties but with prices tumbling and technology improving at a comparable rate, who knows what we'll see in the coming twelve months.

Competition, most notably from China has driven quality to the point it's genuinely difficult to find bad models and these Revolution flash silicone LED lights are prime examples. Commanding £9.99 a piece and boasting a prodigious ten lumens (max) at the front; six the rear, build quality rivals, if not shames designer brands. Monocoque construction offers a genuinely superior grasp of oversized bars and seatposts with visibility nearing three hundred and fifty yards on a clear night without being lost in the neon confusion that characterises our urban landscape. Ultimately, finite five hundred charge life cycles might deter some but with run times close to eleven hours in economy settings, they'll still return two years faithful, service.
However, the charge cables are hopelessly short, especially for those of us refuelling at towers, (as opposed to laptop/notebook) but otherwise I'm genuinely smitten.
Some equally fetching computers from Raleigh's RSP brand have fallen into my eager mitts recently, the most notable being this wireless computer/HRM combo complete with crystal clear display and pretty much every function aside from cadence and tea making. Accuracy seems bang on, buttons are user friendly in gloved hands. My one minor gripe concerns the Heath Robinson handlebar mount. Arguably very secure in situ, installation proved fiddly in the first instance and a few spare cable ties would've been welcome too. Mother Nature's effortless transition toward autumn sees me washing Gore Tex and similar technical apparel in preparation for the cooler, changeable yet deeply enticing sepia season. Riders seeking to beat the early morning chill without resorting to winter weights training gloves should look no further than these BBB Race shield. Polyamide/Polyurethane mixes are hardly exotic but wash well and keep windchill firmly at bay. Extensive reflectives make all the difference when signalling while the rubberised palm and digits ensure excellent all weather control. Dexterity is sufficient to allow roadside adjustments, pannier rummaging and even unhindered photography.
Speaking of fettling, the Feedback sports chain gauge has presented the Univega's hard working Gusset chain with a clean bill of health. A mere .2mm wear in twelve hundred unforgiving miles is testament to their build quality, although good transmission hygiene shouldn't be overlooked. Predominantly fed on a diet of wax lubes, I'm confident of reaching 2,500 before .8mm signals retirement, although 0.06 will hail the ordering of a successor to keep the drivetrain healthy.
So then to our fetching Klein road frameset. I had hoped to bring you a full photo love-story makeover but alas, the edited highlights will have to suffice. Given a thorough vapour blasting, the owner elected an equally enticing blue, complete with sparkle lacquer topcoat. Since the star fangled nut remained lodged in the steerer, it was feared the intense curing temperatures would cause havoc, thus calling for two-pac. However, closer inspection revealed it was metal and so a false alarm. Aluminium isn't the easiest of materials to re/paint since the non ferrous tubes can generate imperfections in the final curing stage but this jewel-like effect is genuinely flawless.

Another customer opted for "Kawasaki" green with sparkle topcoat, both finishes illustrating the quantum leaps in powder coating since the early days of basic primary colours.
























































































































































































Monday, 15 August 2011

Riot & Revolution

Unless you've been living in some muddy backwater, starved of Internet or similar modern communications, most will be aware of the "rioting" which spread like wildfire across the UK's major cities. Debate rages along two overtly simplistic models-"system" (instigated by poverty and neglect) or mindless criminality induced by morally bankrupt "youth". In reality, academic/moral arguments are overridden by devastation on unprecedented levels for many people. Cyclists and cycle retailers were sadly, if perhaps predictably targeted because of high and easy resale values. Participants in the frenzied chaos could simply hop aboard and sprint away into the night with no thought to the feelings of their rightful owners but then thieves lack the basic values of mercy, empathy and compassion. Rioting in response to colossal injustice(s) is one thing, wanton aggression and consumerist looting are quite another. The loss of stock, spiraling insurance premiums and cost of re-fitting can be ruinous-especially for already squeezed small businesses. While left and right of the political spectrum spout rhetoric, supporting your local bike shop and refusing to buy those suspiciously cheap Cannondale touted on eBay/street corner lock ups are small, simple but positive steps we can all take.

Gone are the days when budget shoes meant patent leather uppers that roasted feet within an inch of their lives and parted company with the sole at the first enthusiastic yank on the upstroke. Memories of mid-ride rest stops, being ushered through to the beer garden with our bikes by landladies only too happy to fetch washing up bowels of cold, refreshing water in which to soak our feet once we'd ordered a hearty meal and promised not to interact with families and similarly respectable patrons... Time RXT might retain the faux hides but sport plentiful mesh for consistent, cooling airflow while acres of Scotchlite detailing are perfect for extended summer playtimes or soldiering on through a dry December's gloom. Thermoformed footbeds are marketing speak for insoles that mould to the rider's feet but in fairness do so in a matter of rides and while hardly exotic, reinforced nylon soles promote excellent power transfer without painful hot spots and seem genuinely hospitable to most standard Look/SPDR pattern road cleats. Mesh is a double edged sword though and overshoes are a must in anything heavier than a passing shower. Twenty minutes and they're saturated, demanding eight hours at room temperature to resume an arid and wearable state.Continuing this theme of misty-eyed nostalgia come these rather fetching handlebar and stem from Genetic. Beautifully finished and modestly priced, they're supplied here in the UK by ison distribution and perfect for older road and touring bikes. Common to most contemporary quill types length is limited to either 80 or 100mm but meets the needs of most riders sitting either side of average. Standard (26.0) clamp diameters make sense but riders unable to part with their favourite 25.4s can use one of Nitto's high quality shims. Will Meister has some (http://www.hubjub.co.uk/)


So to something home grown-but definitely not herbal. This here's a titanium brake bolt designed so older framesets can enjoy the pleasures of dual pivot braking without the pain of drilling fork crowns and seat stay bridges. Made in Bristol from 6A14V (an alloy of titanium, aluminium and vanadium) it measures 73mm long and is cut to Shimano RX100, R450 &R650 patterns but also entertains some Tektro and Miche. Fitting is simply a matter of removing the OEM bolt and slotting the aftermarket model in place, remembering liberal licks of Ti paste to prevent galvanic corrosion-especially on daily drivers. Contrary to claims from clubroom oracles, excessive "whip" has been a moot point and I've not so much as lain tools to it in three weeks and 280 miles.


Elsewhere, the otherwise dependable Veloset computer seemed unduly affected by electrical interference.Replacing both head and sensor batteries restored reliable and consistent readings. The eagle eyed will note the return of my once grey Look pedals from 1991. This was in the interests of putting those Time RXT through their paces and rewarded with higher cadences, more efficient power transfer not to mention red faces as we hurtled past some dyed in the wool types despite hauling several kilos of kit in the mighty Knog Dry Dog pannier. However, just as soon as some Keo pattern cleats arrive, I'll opt for these Magnesium bodied Genetic, shaving a few grams and improving ground clearance into the bargain. Much as I like the cleanliness of wax type lubes, I'm running perilously low on White Lightning's Clean Ride but remain convinced there's a few similar types languishing somewhere in the garage. What they lose to wet types in staying power, self cleansing types won't turn to a cannibalistic grinding paste when things turn gloopy.


In amongst a wealth of tatty exotica arriving at Maldon Shotblasting and Powder Coating came this surprisingly sound Klein road frameset. Aside from some unavoidable little scrapes its original "Angry Custard" yellow livery seems remarkably well preserved. Not sure what the Klein's new clothes will be just yet but hopefully I'll return with a photo love story in the coming weeks...











































































































































































































Sunday, 24 July 2011

Flight of the Condor

This week Graham at Maldon Shotblasting & Powder coating brings the 80's Condor back to life in French blue.




Three minutes in the blast cabinet and it's bare, ready to receive the chromate...
Chromate applied, ready for the first oven baking.

Curing alongside a Fuji Mtb frame and swing arm

Here comes the French blue, on with the show- good health to you!

The final bake....






























Saturday, 16 July 2011

Baggy Trousers & Blasting Frames





No, nothing to do with Madness, the 80's Ska inspired pop band-we're talking messenger knickers/three quarter lengths (delete as your road/mtb heritage dictates). Lycra remains a firm favourite for fast blasts on the Holdsworth and Teenage Dream but there's much to be said in favour of stylish modesty as my thirties thunder by. The one downside to this genre of respectable leg-wear is the attention it draws to furry pins-hence my endearing love affair with Veet!
















Missing teeth aren't particularly fetching either...Despite a varied and reasonably balanced diet, my cola consumption was on par with Dennis Hopper's appetite for liquor during the 1970s. The loss of a prominent and very expensive dental crown has ended a twenty year dependency upon this evil mistress.


Polaris Transition bear remarkable similarity to Protective Washingtons, although they're fashioned from water repellent rip-stop polyester which has a distinctly "technical" feel compared with the German marque's brushed fabric. Pockets are the bog standard hip for change, keys and stuffing the hands when mooching around town while the positively cavernous cargo type gobble everything from larger compact cameras, wallets and smart phones through to road maps- er, that's retro GPS for the uninitiated. Stretch panels minimise bunching even-fully laden and hammering along at ninety-plus rpm while the rip-stop lives up to it's reputation, shrugging at brambles and other feisty foliage. They're as chic, civilian and water resistant as you'll need in the urban jungle, although the Protective have the edge for more formal meets. Sizing is a major consideration though and in their infinite wisdom, Polaris have done something very strange for the men-folk. My thirty-two inch waist, thirty-three leg isn't particularly outlandish and I've always managed a medium...I squeezed into our sample sans unsightly muffin top and given a few longish outings, the fabric relaxes. Measurements seem more consistent for the ladies but nonetheless try before parting with your hard-earned.
Diesel strength coffee and regular visits to Maldon Shotblasting & Powder Coating have been keeping the soda scourge firmly in check. In amongst a flurry of rusty motorcycle frames, panels and tanks sat this weary looking '80s Condor road frameset ready for a "French Blue" rebirth.Construction and attention to detail are to a standard "Johnny come artisan" can only dream of. Note the accuracy of brazing- no runs or drips here (more than can be said for the Teenage Deam-at least around the original fork crown). My inclination would be to reconfigure the top-tube cable routing but then perhaps the owner wants to retain its originality and besides, identikit machines/increasingly identikit people are equally undesirable.



The same is true of dirty/squeaky transmissions and I'm pleased to report we've been returning around two hundred miles from White Lightning's "Clean Ride" through the drier months. Maintenance has been little more than a light drizzle on every link and periodically wiping any sludge from the outer plates. However, I'm edging closer to the bottle's end and must make a decision whether to continue, or substitute for a more tenacious gloopy offering for the darker months that creep nearer.






Elsewhere, Knog's mighty dry dog remains a near permanent feature aboard the Univega's beefy cro-moly rack. Summer cloudburst, river crossings and the general hurdy gurdy of rough-stuff touring have made no impression on the fabric or moreover, contents. Its thirteen inch sibling has the edge when it comes to the cut and thrust of commuting since it slips through gaps that bit easier and doesn't foul the floor when wheeling the bike through tight apartment corridors but bigger brother is bang on for weekend touring.





Right, well a kindly editor has bestowed a lovely box of goodies for testing and the wide blue yonder is calling me.























































































































































Tuesday, 21 June 2011

Water Sports.....








No, look elsewhere if you're after the sort involving bodily fluids. We've been hit by a band of low pressure, bestowing monsoon rainfall of the type more commonly associated with epic melodramas. Harbingers of doom proclaim the end of summer but these are perfect conditions for real-world conditions for product tests.





The good folk at Moore Large (http://www.todayscyclist.co.uk/) have left me Knog's Dry Dog to play with. Our seventeen inch version is big enough to hop inside and on the strength of recent long, steady rides-completely waterproof (even submerged during river crossings) thanks to the sonically welded 1200 denier PU fabric. Acres of bold, reflective detailing ensures 180 degree visibility, which is an absolute godsend whether chasing along country lanes in the dead of night or tackling the usual town centre malaise. Similarly, Rixen Kaul click-fix systems inspire confidence over the roughest roads and trails, accommodating most gauges of rack with a deft flick of the Phillips screws. Asymmetrical design allows it to ride either side and this extends to the webbed shoulder strap which shares a similar profile to the pig-dog. A splash of cartoon nudity is the only thing likely to divide opinion and for my part, I'm indifferent but some office/environments might not be so liberal.




Having discovered the Univega's Kenda Ultralite tube mysteriously perished at the valve stem, it now lives on as a top-tube protector, which ironically coincided with the purchase of another patch kit. Mean and rueful of the glue-less breed, finding they either don't adhere at all, or slowly peel away, I'll stick with that little tube of vulcanising solution. Leaning bikes by their top-tubes is something I avoid wherever possible but on those occasions calling for intimate relations with street furniture, the old inner tube trick protects paintwork and thin-walled tubing from unnecessary nicks, scrapes and dings.




Freedom to choose (or at least make genuine choices) should never be undervalued. I've been exercising my right to ride sans lid these past few weeks and it has raised a number of interesting points. Firstly, other riders seem more inclined to acknowledge me-regardless of genre or tribe while drivers pass with greater caution and distance. Having worn helmets for the best part of twenty-three years, going totally bareheaded doesn't come naturally-hence the traditional clubman's cap, providing protection from the sun's glare and wind-chill. However, the lid has been resurrected to coincide with these rather tasty new lights from Moon. The creatively monikered X500 is a five hundred lumen, five mode, high power commuting lamp designed for either handlebar of helmet fitting.






Early impressions suggest commendable build quality and output relative to competitor brands, although I have some reservations concerning the lack of peripheral illumination-a moot point perhaps when used as a secondary system but otherwise a consideration when emerging from unlit side-roads, junctions etc . This aside, a choice of wall or USB charging is particularly welcome, although run times in the upper modes don't favour extended nocturnal playtime. Several weeks' thorough testing will reveal all. Elsewhere we've the five LED Mask with detachable covers for perfect colour contrast/coordination and its sixty lumen Shield sibling. Perfect on paper for desk-bound commuters I'm looking forward to putting these through their paces. Our samples were supplied by Raleigh UK (http://www.raleigh.co.uk/) should you fancy a more detailed run down before I return with a more detailed evaluation complete with "Beam" shots.




"I reject your reality and substitute it for my own" is an undeniably witty retort and I am fully aware that stupidity cannot be legislated against. However, there are people who cannot see the correlation between Russian roulette and overtaking on a blind bend. The photograph here depicts the aftermath of a head-on collision between an MG sports car and Ford Mondeo, resulting in critical injuries, necessitating three hour road closure. I realised the gravity of the situation upon spotting a lone stretcher and two police officers gesticulating in between periods of protracted discussion. Nineteen years previously, a cyclist in his early twenties was killed having struck a postal van. Talk focused upon the rider's helmet omission and according to eye-witness reports, the stationary vehicle wasn't badly parked-a genuinely tragic accident resultant from a momentary lapse in concentration.





There prevails a curious myth that simply passing the car test (along with examinations per se) qualifies individuals as competent drivers when in fact it merely proves they were assessed as being suitably safe to be allowed to operate a vehicle on public roads without supervision. There are no shortcuts to road craft as the proliferation of fatalities amongst thirty-somethings who acquire motorcycle licences via intensive course and on large capacity (typically 750cc) machines. By contrast cyclists and motorcyclists who adopt cars as another mode of transport generally "read" the road to a better standard, showing greater empathy for others.





Sermon over and since it's pouring with rain, I'll go testing.