Diversions Still Waters & Simplicity

 

There's much to be thankful for but sometimes it feels as if I'm living on borrowed time. I had hoped to be more secure, dare I say, recession-proof by this point in my life but then life can often divert us. Factors such as intelligence and education are significant in determining our future, but are two very different things.

Then of course, there are those who just inherit wealth and can live off the security this provides. I’m often amused (and privately infuriated) by those who inherit a successful business and purport to be self- made. A  narrative often reinforced by their family and immediate circle. Often overlooked in all of this is the ability to adapt. Those who cannot (or will not) are at a pronounced disadvantage.    

The pandemic arguably reconfigured the construct of certainty-the importance of making the most of everyday and in every way possible.  There are balances of probability but no guarantees.  Nostalgia is a dangerous distraction, although I can readily appreciate the sense of comfort it may bring.

Occasionally high-end NOS components pop up at very tempting prices. Some are still very relevant- I saw a pair of Suntour XCD single speed hubs-120mm spacing, so (almost) perfect for a single-speed winter/trainer based around a track/road path frameset. Cup and cone simplicity but with beefy seals to keep the elements out.  As an engineer once aid to me, there's a fine line between beneficial and overly complex enclosure. 

I've always been drawn to hub gearing but deterred by accessibility and being honest wheel removal following a flat is more involved. Not what I want on a cold January morning ten miles from home, but others would rightly point out is a matter of familiarity.

Could it be an irrational fear of something different... I spotted this Halo TK track hub going for a proverbial song- 32 holes and white, which explains the favourable asking price. I can live with white. I also spotted a 32-hole Ryde Taurus rim going for considerably less than the otherwise excellent Sputnik. It’s intended for gravel and similarly heavy-duty duties, so perfect for the rigors of winter.

Sealed cartridge bearings, freewheel one side, fixed the other-what's not to like. This kind of spec also lends itself to single speed cyclo cross, which has always appealed to me- mud, simplicity and ease of cleaning are definite draws. Then again, I'm always saying these things, only for the completed vision to evolve into something more complex, some might say cluttered. Denise wasn't intended to sport a four-point rack or secondary lighting, but these have proved immensely practical additions. 

I've switched Muffin to the Shimano PD ED500 Shimano PD ED 500 Pedals | cycling-not-racing since I fancied a change and wanted to further test my theory that shoes such as the FLR MTX and Shimano GTX are best suited to broader bodies, which provide some additional support and offset some flex that's required of a shoe also designed to be walked in. Pedal body width is also mitigated by 165mm cranks and a lofty bottom bracket. 

I'd been tempted to go the dual sided Exustar route, but aside from the additional heft, I was only going to be using the SPD side. I my experience, dual sided-whether SPD, or TIME ATAC is always the most convenient marriage- step in and scoot off. No faffing and flailing trying to locate the cleated side.

That said, if you did want to go the single sided route, patterns such as Shimano's now discontinued A520, or the current ES600 (Ultegra grade) have a tapered profile, providing greater support to touring and bikepacking shoes. One thing led to another, and I found myself stripping the M540 and XT Shimano Deore XT PD-M8100 Pedals | cycling-not-racing pedals, filling the former with Peaty’s Speed Grease PEATY'S SPEED GREASE | cycling-not-racing, the latter with some Zefal lithium grease- the latter was green and visually reminiscent of Shimano’s factory stuff.  

With the mercury hitting the high 20s, I decided it was time to give Denise a sudsy bucket clean and switch to some Blub Wax chain lube before heading out for some dusty byway blasting- I was keen to see how securely the Wolf tooth cages would hold 750ml bottles off road.

Not that I was expecting any ejection-there wasn’t (although stainless cages can still prove quite springy, depending on the diameter). The Wolf Tooth are relatively slender, so will fit nicely with older road bikes with pencil-thin tube sets and are a good aesthetic fit on Denise. Since I was there, I removed Denise’s USE seat post and blasted some waxy corrosion inhibitor inside the seat tube, then applied some of the Zefal to the post, binder bolt, not forgetting the quill adaptor.  I’d also noted that the stem and wedge bolts were somewhat stubborn, so treated the threaded sections more generously. Aside from a good connection, this would also test for galvanic corrosion, which was a traditional issue with lithium, greases and metals of different parentage.  

 I’d also found two razor sharp hedge clippings buried deep in the front Maxxis Rambler- new tube, old one patched and a noter to replenish my 700c stock.      

I will switch the cages over to Muffin, since Wolf Tooth claim they’re designed to accommodate frames where space is at a premium, whether this be a compact main triangle, or one consumed by bike packing luggage. Though not tricky, I'm finding removal of those bigger, trade bottles less convenient on the seat tube with the existing composite models, due in part to the Topeak frame fit pump nestling beneath the top tube.  

Something I'd expect, given the price, but bottle entry and release with the Wolf Tooth is super dependable-even when hossing along. I've also been pleasantly surprised by how well the Silca bar tape has coped off road. Leach like purchase was expected, and I like the direct connection with the bars, but no jarring, or fatigue thus far.    

As for the Blub, this doesn't cure to the usual paraffin type consistency, rather assumes a wetter state-something I'd forgotten and came as a surprise when I glanced down at the drivetrain. Some waxes just run very clean, others scab off when the weight of contaminant reaches a critical mass. I decided to clean some accumulated gunk from the jockey wheels after a few off road excursions, which was strangely satisfying.

Miles per application is surprisingly good from this and its ceramic cousin, but both need to be reapplied if bikes have been standing for 48 hours. Not an issue for a daily driver, but potentially impractical on a best, or race bike that may only come out at weekends. 

Swapping n' Stripping

 

150 miles hence and my bruised inner right thigh reminded me why I substituted it. This time round, I’ve reached for Selle Royal Respiro, which is something of an “old faithful”. Should it prove a little narrow, I’ll reach for the BBB Echelon, which is another all-rounder but slightly broader-145mm at the widest point. Madison have sent me their M Part Primo anti-slip silicone gel bar tape.

 Available in four colours- red, black, blue and white, it employs a silicone underlay for damping and a Polyurethane exterior for tactile purchase. It’s a little heavier than some at 128g (complete and uncut)  I’ve dressed Mufin’s bars since it contrasts nicely and I’m very satisfied  with the Wolf Tooth Supple Lite Wolf Tooth Supple Lite Bar Tape | cycling-not-racing adorning Ursula’s Soma Condor 2 SOMA CONDOR 2 SHALLOW DROP BARS |   which  offers a good blend of connection, damping and grip without undue bulk.

It’s also in very good shape, so stays-for now at least. Arguably, no need to go beyond 2.5mm, even off road since the big 2.3inch tyres also provide plush, refined comfort. Before I forget, here’s Steve’s review of the Continental  Contact Speed Continental Contact Speed Tyres | cycling-not-racing      

The M Part Primo is surprisingly easy to fit and thoughtfully employs a tacky silicone backing strip, rather than the traditional adhesives, meaning its tolerant of correction. No cheater strips either which suits me, since I’ve found myself defaulting to the “figure of eight” technique around the brake levers. Plenty of tape left, despite generous overlap on these 44cm wide Genetic D-Riser 4 GENETIC DRISER 4 HANDLEBARS | cycling-not-racing

Elsewhere, I've been harvesting some smaller fasteners, specifically bottle cage mounting hardware, not least as it's good to have some decent staples in stock-a chainring bolt can go rogue and create mischief at the least expected (read convenient) moment. Particularly on the fixed. Several years down the line, I’m still seriously impressed by these Genetic Tibia GENETIC TIBIA TRACK CRANKS & RING | cycling-not-racing

Obviously, it’s important to get the correct bolt and collar length, not to mention applying a light coating of assembly grease. This will give you a sporting chance of removing them when ring replacement’s due.  

 Aluminium alloy fasteners might sabe a few grams while looking pretty into the bargain but where components are under load, I reach for Cro-moly every time and twice on Sundays. I’ve wasted no time in fitting them to Dobbin and torquing down to 12nm. Another little job off the list.  

 On the subject of small parts, I'm keeping an eye out for a replacement skewer for my TWBents Bob Yak homage trailer.

I'm confident I've stashed the original unit safely away in one of my storage boxes, following Ursula's renovation last year. Spares of this kind make sense. However, some folks have been hawking them for £74 apiece, which is laughable, not to mention uneconomic. I always preferred that coupling system to that employed on the original Bob Yak. I was fond of mine but there were some things that merited improvement/felt a little fragile.   

  A few hundred miles down the line and I'm reaching the conclusion that the FLR MXT Vibram Trail Shoes are best suited to pedals with a broader, or at least, tapered angular profile.

This includes these Wellgo, which offer greater support (and consequently efficiency) than the mighty dual side cross country M540 and XTs. They do strike an excellent balance between stiffness and walking for longer periods-think touring and bike packing rather than gravel racing, or competitive. They’re a notch or so better on the riding and walking fronts than the otherwise likeable Shimano MT701 GTX SPD  Shimano MT701 GTX SPD Shoes | cycling-not-racing

Staying with pedals a moment, here’s a quick guide to keeping them cleaned, greased and happy Simple Pedal Overhaul | cycling-not-racing I’ve acquired some lever rubbers-primarily since the WTB bars wide flare tends to see the lever ends grazed against brickwork, which sets me on edge for several reasons. Might also provide some additional grip when riding in the wet.  

On the chain lube front, I'm continuing to default to the TF2 Performance All Weather Lubricant TF2 PERFORMANCE ALL WEATHER LUBRICANT | cycling-not-racing . This is a lighter middleweight that returns decent mileage in changeable conditions but without attracting too much grot, especially along fire roads and forest trails.   I've since discovered that Weldtite have revised the formula, removing the PTFE component, which has me intrigued...

Whipped out the chain checker and Denise's KMC is still in reasonable health 3 months down the line. I’m confident I’ll get a further six weeks, or 600 mixed terrain miles before its retired. That said, I bought another batch of staples, since chain wear can be very sneaky.  A bit like the front mech, which has dropped the chain a couple of times recently-nothing turning the adjustment screw 1/8^th of a turn didn’t fix, but annoying and inconvenient at the time.

 

Nuisance but necessary & Nice

 

Worn cleats and frayed inner cables were unwelcome but easily sorted. Evasive entry tipped me off about the cleats and a tyre-tickling straddle wire-noted when I was pulling the Carradice’s Velcro strap snug post-ride. I also found myself stripping some more pedals- these nickel-plated SPD/Keo Exustar, which hadn’t been touched, let alone re-greased in twenty years.

The lockring was decidedly stubborn, and though there was still some grease inside, it was clear how frugal some factories are on the lube front. Not quite at the stage where I’m stripping and repacking new pairs before fitting but certainly has me wondering if I should, as a matter of course.  

After countless miles and a particularly memorable tumble with terra firma one icy January morning, the otherwise rugged, low -maintenance and very comfy Wolf Tooth Supple Bar tape is beginning to show some subtle signs of wear and weathering, mercifully around the tops, where it can be protected beneath electrical tape. 5mm thick it certainly absorbs road and trail buzz incredibly well, although getting neat, flowing lines took me a few attempts first time round.

I have other options, the most obvious contender being  The Acros Silicone Bar Wrap LONG-TERM TEST: ACROS SILICONE BAR WRAP | cycling-not-racing  which is also rugged, grippy and provides excellent damping. The embossed pattern tends to hold dirt- think oily fingerprints and similar transfer, which can be frustrating, especially during winter when you’ve touched the bars following a deep bike clean/drivetrain exorcism!

Or for that matter, if the front mech’s dropped the chain too far, and you’ve needed to scoop it back aboard. This happened at the crest of a long climb, when I decided it was big ring time…Oh, and then of course, an approaching Land Rover pilot decided they didn’t fancy changing course.

Mercifully, they seemed to begrudgingly sweep past at the crucial point. I digress. Saddleback has sent me this Silca Nastro Piloti, which boasts “unrivalled durability”, asymmetric texture for high and moderate grip and relatively slimline at 1.85mm (equivalent to 2.5mm when cushioning is factored into the equation).

Theoretically, this means good cushioning without a chunky effect, which is obviously what you’d want on a road bike, although arguably less significant on a gravel, cross, or beast of burden build. Black is one of those ultra practical colours (shades, if we’re being proper, dare I say pedantic) colours and arguably the obvious choice for Denise.

There are quite a few considerations when choosing bar tape aside from colour and damping. Given the quiet but growing popularity for wider, flared drops, tape needs to be long enough to provide a consistent, flattering overlap. Traditionally, corks were the default, and it’s not difficult to see why. It dampens vibration well and is hardwearing. 

Darker colours are more practical for winter/training and daily drivers. Following on from this, corks and other “simpler” materials respond well to being scrubbed with a moderately stiff brush, whereas those with polymer coatings require a much gentler approach to avoid stripping their properties.  

One thing led to another, along came some red bottle cages, which would complement Muffin's existing livery, ruling out colour clashes, or similar faux pas. The Lezyne flow SL was ported over to Ursula. These Wolf Tooth Morse Cages were fitted to Denise. Made from hand-bent hollow stainless steel. The base is drilled not for weight reduction, rather to ensure easy adjustment and ultimately, compatibility with most contemporary framesets. Aside from small compact geometry models, it's also intended for use with bikes using frame fit luggage, such as this Topeak Midloader TOPEAK MIDLOADER FRAME BAG | cycling-not-racing  

Aesthetics aside, bar tape should be pensioned off fairly regularly. Frequency is a hotly debated topic and depends on who you speak to. Abrasion, loss of damping, fading, failing backing adhesive. Seasonally on cross and similar competitions machines, or those doing regular service on indoor trainers.

Bar tape on bikes doing regular turbo trainer service are typically contaminated by sweat, salt, energy drinks. A corrosive cocktail that can result in bar failure. No, not an urban myth.  

Staying with bars, Magishine has sent me their Hori 1300 front light. Magicshine’s build quality and overall performance continues to improve and ultimately impress, especially given the asking price. The Hori features a CNC machined anodised aluminium alloy casing compliant with IPX6 for weatherproofing, pumps out a maximum of 1300 lumens, dipping to 900, 400 and 200, which caters for most road biased contacts.

I should also point out; the lens uses the increasingly common car-type cut off beam to project the light downward and without dazzling oncoming traffic. There are two powerful day and night flashing modes -800 lumen day and 200-1000lumen night, a wireless rechargeable remote.

There’s a very versatile range of mount designed to stack accessories for a really clean aesthetic- a Garmin computer up top, light in the middle, GoPro camera at the bottom, saving considerable real estate. However, those with busier cockpits can always go for the extended mount, positioning the light out front, clearing cables, smaller handlebar bags etc. Right now, I’m in child at Christmas mode but time and mileage will tell.       

     

Forest Frolics & Rainy Reveals

 

The rains came, which was welcome on so many levels and perfect for assessing the performance of tyres and shoes in wet, slippery contexts. I was particularly keen to see how the latest generation of Continental Cross Kings would bite when things tuned slippery, dare we say boggy. They bit and subsequently cornered better than I was expecting but time and  more intense gloop may say different.

They are quite sprightly over hardpack, loose surfaces and indeed, metalled road, although as defaults, I remain impressed by CST Patrol. CST Patrol Folding EPS Tyres | cycling-not-racing I’ve been forming the opinion that the FLR MTX are best suited to broader pedal platforms. Ursula’s Shimano M757 seemed more supportive than more modern dual sided designs and I’ not sure why.

These first generation tend to clog with mud noticeably quicker. I noted some Juice Lubes Bearing Juice creeping from the bodies. Maybe I’d been a little too generous, a little too liberal but we’re talking creep, not oozing. I was also impressed by how well the NOS SR Suntour mech scooped the chain between rings- snappy and reliable, even under load. Sure, it seemed fine on the stand, and designed for a triple, there’s plenty of throw. However, stuff can play impeccably on the stand and misbehave on the road, or trail.   

Upon returning and giving both of us a good clean, using up the last of the Nzero degreaser NZero Bike Degreaser | cycling-not-racing and indeed, the Peaty’s Link Lube All Weather. Then was also the time to switch pedals- I went for the A530 since they should bring out the FLR MXT’s best qualities.

Horses for courses, essentially. While I default to gravel and cross-country mountain bike shoes for general riding, road included, since the soles are stiff but still compliant and grippy enough for walking but are a little too sporty for more adventurous outings, touring particularly.  

These Sidi Aertis are another design that bridge the gap between mountain biking and gravel, although, riding with merino blend socks, I wasn’t surprised to find myself with wet feet given twenty minutes in a heavy downpour. Mercifully, the shoe’s profile means thinner waterproof socks are also realistic (and would be a must for me, during the winter months, although I’d probably switch to the Shimano MW7 Shimano MW7 (MW702) Gore Tex MTB Shoes | cycling-not-racing) by the time things turn wintry wild).

A touring shoe of the FLR’s genre also has scope for waterproof socks. Much as I anticipated, the FLR kept persistent rain at bay for an hour before it became palpable. Fine for commuting and similar duties without recourse to toe covers, overshoes etc. 

Flex was more palpable when on the fixed and charging up the climbs, but I didn't want to go for a single sided, hybrid design. Even though the bottom bracket gives a sporting chance when cornering, there's greater clearance with the Shimano 540 and being dual sided, it's easier to clip in and power away-say at the traffic lights.   

Talking of lights, the new seasons models are beginning to become available. I've been sent this Cat Eye Tight Kinetic, which is impressive for the price. A "braking" function for £23 would've been unheard of, just a few seasons back. I've also received this Lezyne Flow Cage SL Enhanced.

I regret passing my last pair of Lezyne flow on, so was rather pleased to be sent another for testing. Left- and right-hand specific models are nothing new, but some are definitely more ergonomic and though debatable, arguably one of the last words in customisation. On a strictly personal note, Lezyne’s are the best I've used to date.    

Side entry cages are what's called for on smaller compact geometry framesets, since you can both fit and access bottles without catching knuckles on the top tube, or indeed, frame fit pump-should you run one. They’re also a good fit for gravel and bike packing contexts where you’re running a bag within the main triangle.

 I'm a convert to the mini compressor type inflators, at least for roadside rescue, although Muffin, Ursula and Denise still carry a Topeak Road Master Blaster. Muc-Off Airmach and Lezyne as reliable, efficient backups.

The rains and wet roads were really useful from a testing perspective, although I wasn't surprised to discover things performing as I'd expected. However, standing water meant bikes were suitably filthy given a few outings. I'd seen some bike wash going silly cheap and was keen to see how it compared with some premium blends, not least since I was down to the Stan's No tubes.

 I tend to give bikes a good wash n' wax, since they cut through the grime, while leaving a protective wax barrier behind. Nonetheless, I don't always want to take this route and bike washes still have their place. 

I was pleasantly surprised by how effective the budget potions were on heavily encrusted organic grot, although as I'd hope it's not potent enough to strip oily, or greasy stuff. I reached for this Dynamic drivetrain detox to strip the residual Peaty's Like Lube and modest contaminant from the rings, chain and cassette.

Having exhausted this, I've switched to TF2, which is a competent and inexpensive all-weather formula that holds out well in moderately wet conditions, although attracts more contaminant than more sophisticated blends and also contains PTFE, which isn't particularly kind to us, or the wider environment. Formative outings on Muffin suggests the thru axle to quick release conversion is very dependable and seems slightly stiffer than traditional quick release configuration. I've also gone for the slightly narrower (38mm section) Vittoria adventure tyres, which run at a similar pressure to the Continentals and gives a little more clearance around the Gravel Hugger front guard.  Talking of tyres, here’s my review of the Maxxis Rambler Maxxis Rambler Tubeless Ready Tyres | cycling-not-racing

The Repack aka Green Goo & Happy Pedals

 

After some deliberation and in some instances, a few years too many, I decided it was time to strip some of the Shimano pedals, specifically the M737 hailing from 1990. Cue Shimano TL-PD40SPD Axle removal tool, a 36mm headset spanner, some Juice Lubes Bearing Juice and WTB Grease. Though very effective, I’ve since gone for a metal tool with integrated handle, simply as its likely to be more durable, dare I say, more convenient.  

I started with these Shimano ED500, which have served well but were only a few years old. The lockring came free with reassuring ease and out with the axle. A quick wipe with a rag dipped in solvent rids any residual gunk or lube that might react unfavourably with the bearing juice or otherwise create mischief.

Mercury in the high twenties had softened the green synthetic putty nicely.  A liberal dollop from my index finger into the pedal body and from there simply a question of threading the axle home-noting right and left-hand threads.  Snugged down to 10nm the nasty soiled grease is forced out (in the same principle as pumping grease into a dedicated grease port). 

Wipe this and excess fresh grease. Now give the pedals a spin and check for any signs of play.  Ten minutes apiece, done twice yearly this will extend the life of bearings and other internals considerably.  Any decent waterproof grease will do, although I prefer stocky synthetics since they won't do anything nasty to seals and other rubberised components. 

A blend such as Peaty’s Speed Grease PEATY'S SPEED GREASE | cycling-not-racing is arguably better for hubs and Hollowtech II cranksets and possibly headsets but work just fine on pedals, if you’re a time triallist, or just really keen to keep friction lower than a snake’s testicles. I repeated this proves with the single sided A520 and its 530mountain bike counterpart. WTB WT-G Precision Bike Grease Wolf Tooth WT-G Precision Bike Grease | cycling-not-racing in the former, bearing juice the latter.

Back together and buttery smooth. 25 minutes all told, start to finish and strangely therapeutic. I switched Denise’s Leatt Endurance 6.0 in their favour, since I’d a hunch these patterns are the natural companion for the FLR MXT. Spoiler alert, this would seem so, although there’s a definite honeymoon period when it comes to contact points, any change.

I’ve always been a gang of one, my father perhaps unkindly referred to as a “non-joiner” hence I don’t belong to clubs, or similar social riding groups. I’ll chat, maybe share a joke mid ride, or at rest stops and I’m socially adept in commercial contexts. However, I’m very self-aware, can tell who is/not a good fit for me, like my own space and solitude to reflect and re-charge.  

The point of this lead up is the sudden preoccupation with a “male loneliness epidemic”. I’m not sure this is a contemporary phenomenon, rather getting a lot of attention in the context of romantic relationships. It has long been evidenced that men experience isolation due to their shrinking networks and relationships linked to formal work, whereas women forge cooperative relationships and identities beyond work and their immediate household.

This also means that many male relationships are centred around t economic sphere, and should there be a break- a loss in employment and the structures around this.

While this may have tapered off a little, thanks to the increasing number of people working remotely, there are a wealth of interactions engaged in and related with work. Similarly, there is the question of whether workplace relationships have any tangible depth or relevance outside of that environment.  Some people also persist or tolerate unhealthy relationships on the basis they fill a void and distract from tackling the real, underlying issues.  

I would also take some issue with the idea that gender roles have become more fluid. I'm not sure whether this is influencing a shift toward popularist right wing support, or whether such popularism seeks to entice people who are feeling more isolated, taking them along the classic fascist rabbit holes. Blaming women and other groups- trans people in particular for the perceived shortcomings-lack of status, access to opportunities etc. Classic themes in the fascist playbook.

Then of course, there is the stoking of fear. At present there is arguably a status anxiety, a sense of cultural de-throning. At its most basic, this is about people feeling threatened, resentful towards others and a desire not for improved opportunities, quality of life, or economic prosperity but pushing other groups down. This leads to a sense of restored dominance, dare I say superiority over others.  Right, I must whip out the patch kit and assert dominance over some wounded butyl.